- Audio cable
- USB audio interface (only for Windows machines)
- 6.35mm female to 3.5mm male adapter
- 3.5mm male to 3.5mm male cable
We have certified a specific cable and vendor (Griffin) which ensures top quality and consistent behavior, other vendors could be verified by demand.
We have certified a specific vendor (Audio-Tech), who provided the best results in terms of audio quality, other vendors could be verified by demand.
The is a simple and generic adaptor, there are no special requirements for it. (no vendor was certified, all displayed similar results)
The is a simple and generic cable, there are no special requirements for it. (no vendor was certified, all displayed similar results)
The following steps will describe how to connect the device to the interface as presented in the following illustration.
Connect the audio cable to the device.
Connect the 6.35mm to 3.5mm adaptor to the "device input" end of the audio cable.
When connecting device to a Windows machine:
Connect the 6.35mm to 3.5mm adaptor to the "interface output" (from the interface is output to the device input).
Connect the 3.5mm to 3.5mm cable to the "interface input" and to the "device output".
Connect the USB interface to the USB port of the computer.
When connecting device to a Mac machine:
Now configure the device in SeeTest Automation as described by the instructions here
Setup audio for iOS devices with no audio jack built-in
For iOS devices with no built-in audio jack ( i.e. iPhoneX), another hardware component is needed: