Page tree

Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


  1. SeeTestCloud Server station: The machine on which the server is installed (on MacOS and Windows, this station may be also Device Host station):

    • HP DL360 G7 or better
    • Intel Xeon Quad-Core 3.10GHz 8MB CPU
    • 8 GB RAM
    • 1 available USB 2.0 port and USB cable

    • MacOS High Sierra or higher on Intel i7 64-bit processor with 16 GB RAM
    • Microsoft® Windows Server 2012 Standard 64-bit  or or higher

  2. The Device Host station: The machine to which the mobile devices are physically plugged into.
    With the following specs, you can connect up to 12 devices in total (both iOS and Android):


    • HP DL360 G5

    • 2 CPU Xeon 5410

    • 8 GB RAM

    • 1 available USB 2.0 port and USB cable

    • Microsoft® Windows Server 2012 Standard 64-bit or higher


    • 16 GB RAM
    • Intel® i7 processor 4th generation or newer
    • SSD based Hard Drive
    • Microsoft® Windows 7 Pro edition (Windows 7 Enterprise is not supported) or higher (must be 64-bit) OR Microsoft® Windows Server 2016 or higher (must be 64-bit).


  1. The Device Host station
  2. SeeTestCloud Server station
    • Administration rights enabled
    • Access to change the firewall configuration
    • Connection to the organization network
    • Access to install software (iTunes, USB drivers, etc) on the Device host machine.
  3. Selenium Agent station


All communication is handled via a single port. By default, the chosen port is port 80.
If the cloud server and the Device host machine are installed on the same machine, the default values will be port 80 for Cloud server and port 8080 for the Device host machine.
The user can change it according to their needs.