Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

In order to use the audio feature, you are required to set up an environment which has several hardware dependencies 

Hardware Components :

  1. Audio cable
  2. USB audio interface
  3. 6.35mm female to 3.5mm male adapter
  4. 3.5mm male to 3.5mm male cable

1.The audio cable:


We have certified a specific cable and vendor (Griffin) which ensures top quality and consistent behavior, other vendors could be verified by demand.

Here you can find the cable on the manufacture's website



2.The USB audio interface:

We have certified a specific vendor (Audio-Tech), who provided the best results in terms of audio quality, other vendors could be verified by demand.

Here you can find the interface on the manufacture's website

3.   6.35mm female to 3.5mm male adapter

The is a simple and generic adaptor, there are no special requirements for it. (no vendor was certified, all displayed similar results)


4.  3.5mm male to 3.5mm male cable

The is a simple and generic cable, there are no special requirements for it. (no vendor was certified, all displayed similar results)




Setup

The following steps will describe how to connect the device to the interface as presented in the following illustration.

  1. Connect the audio cable to the device.

  2. Connect the 6.35mm to 3.5mm  adaptor to the "device input" end of the audio cable.

  3. Connect the 6.35mm to 3.5mm  adaptor to the "interface output" (from the interface is output to the device input).

  4. Connect the 3.5mm to 3.5mm cable to the "interface input" and to the "device output".

  5. Connect the USB interface to the USB port of the computer.

  6. Now configure the device in SeeTest Automation as described by the instructions here


  • No labels